Scopri

Premium Products Most Downloads Trending Today Flightsim.to Premium FlyByWire A32NX PMDG Boeing 737-800 Airbus A320neo Fenix A320 On Sale Standalone Aircraft

[REALISTIC] Edinburgh (EGPH) GSX Pro Profile - Pyreegue/ORBX

Realistic GSX Pro Profile for Pyreegue (Orbx) Edinburgh

Installation

Place the file into \Users\[Your Username]\AppData\Roaming\virtuali\GSX\MSFS
Note: ensure no other files starting with egph are in this folder.

Features
  • Realistic/correct handling companies (to select handler ensure GSX auto mode is off)
  • Custom pushbacks for all stands (straight push is standard on stands 6 - 10, 20 - 31)
  • Custom passenger walking routes
  • GSX VDGS/Safedock placed where installed in reality (1B - 30, 100, 102-106)
  • GSX AGNIS placed where installed in reality (200 - 212, 31 - 34)
  • Hand placed vehicles
  • Max wingspan sizes correctly set up
  • No fictional pax barriers etc.
Usage
  • Stands 2A, 3A, 4A Setup to use the adjacent jetways, rather than stands 2, 3, 4
  • Stands 9A, 10A, 208 disabled as they no longer exist in reality (old 209 depicted is where new 208 is)
Max Aircraft Sizes
  • Code E (B77W) - 4A, 12, 15, 16, 18 (tested with Asobo B787-10)
  • B788 - 2A
  • A342 - 23
  • Code D (B763) - 21, 210, 211, 212
  • B753 - 3A, 1
  • E195 - 5, 19, 200 - 202, 206 - 207
  • Code B (E145) - 26
  • Code A - 99, 101
    All other stands are Code C (tested with B738/A320)

Changelog recente for 1.1

- Added Jet2.com as handling option
- Added Signature as handling option (for Bizjets)

5,086 Downloads 17 October 2022

Reviews

thanks

8 months ago

dexspeed

Gate 1 passengers start using the attached jetway for deboarding, but then halfway up the jetway they exit and float down to the airside walkway to finish traveling to the building.

1 years ago

Gilandred

Most realistic EDI profile I have seen. Loving the accurate pushbacks too. Good job Luke!

1 years ago

s4m317

Comments

Hi, gate 1 is broken for some reason. Any ideas why?

24 days ago

bradclooney

Stand 1, pax are boarding via invisible stairs to jetway, then via jetway entering ac.

2 months ago

I had the same problem. Do this: 1. When parked at Stand 1, open the GSX menu. 2. Click on "Customize Airport positions" (You may see a pop-up about parking mismatches. I hit cancel.) 3. Beside "Passenger waypionts" click the garbage can to delete the customized waypoints. This should solve the problem. Hope this helps!

2 months ago

Martin65500

VITYUKS

No passagiers are (de)boarding at stand 1B on my side. Stair trucks remain on their position. Cargo is (un)loaded and working well.

3 months ago

Working fine when tested, which aircraft type?

3 months ago

luke11brown

Crizz

VDGS for gates 15-18 at least seemed to be floating in the air with the Pyreegue airport, will this be fixed? Does anyone else experience the same?

3 months ago

The GSX VDGS's have been been placed at the same position as the scenery ones. Due to interference they need to be placed slightly in front so the display is readable. It is the best solution until Pyreegue release a version that has the option to remove the dummy scenery VDGS, or ones with the nool VDGS module. (Let's hope so!)

3 months ago

luke11brown

mogaoscar

does this work if i downloaded it off the marketplace?

7 months ago

Unsure, but should work fine, assuming the profile is put in the folder for GSX.

3 months ago

luke11brown

jamiesim004

Thanks form sharing your GSX profile. I hope something went wrong at my end because I ran into quite a few problems after installing it immediately prior to starting a VA flight. Followed the usual procedures leading up to pushback but as the tug tried to connect, GSX went crazy, disturbing all custom views, repeatedly trying to restart and eventually the nosewheel dropped into the apron. Tried a few things including restart Coutali all to no avail. Abandoned the flight, rebooted PC and restarted MSFS with same flight plan etc... same result. Removed GSX profile, rinse, repeat and all working properly again. I have installed many GSX profiles and followed the same process this time.... totally baffled what might have gone wrong... any ideas? Maybe someone will try this profile (using Gate 15) to see if they have any problems... might just be something at my end which has thrown a wobbly!

8 months ago

Sounds like a normal GSX day to be honest!

3 months ago

luke11brown

slicker55

thanks

8 months ago

dexspeed

Gate 1 passengers start using the attached jetway for deboarding, but then halfway up the jetway they exit and float down to the airside walkway to finish traveling to the building.

1 years ago

Unfortunately a GSX limitation. I have setup the walking routes in case someone is flying an airline that doesn't use the Jetway (e.g. Ryanair) It seems GSX wants to route the passengers down via the waypoints after reaching the Jetway root. If you want to, you can remove the PAX waypoints in the editor for Gate 1, which is very easy to do!

3 months ago

luke11brown

Gilandred

Gate 10 doesn't recognise the jetway and buses passenges by stairs?

1 years ago

edinburgher

For some reason, 9A and 10A are not disabled for me

1 years ago

These are disabled in the sense that they won't be selectable in GSX as the wingspan is set to 1m

1 years ago

luke11brown

DougFlies320

Most realistic EDI profile I have seen. Loving the accurate pushbacks too. Good job Luke!

1 years ago

s4m317

luke11brown
1.3K Karma
1 Uploads 5K Total Downloads 2 Followers
Changelog

  • Rilascio iniziale del file

Dona

Il freeware è bello, ma non va dato per scontato. Mostrate il vostro sostegno al creatore di questo componente aggiuntivo. Le vostre donazioni per sostenere il creatore sono apprezzate!