This is a modification to the MSFS 2020 default Asobo Cessna Citation CJ4 aircraft and is primarily aimed at improving the aircraft flight model to make its overall performance more closely match the actual aircraft, providing a much closer experience to flying the real aircraft. Multiple changes have been made to the aircraft Flight Model, Weight and Balance and Engine parameters, which are detailed in the Change Log file included in the download.
This mod is easily installed by simply unzipping the download file and copying the mge-asobo-aircraft-cj4 folder to the MSFS Community folder. It will then replace the existing default Cessna Citation CJ4 aircraft in the MSFS aircraft selection screen, and will also continue to utilize all of the existing available Liveries. To uninstall the mod and return to using the MSFS default aircraft, simply remove it from the Community folder.
Microsoft Flight Simulator © Microsoft Corporation. Asobo Cessna Citation CJ4 Realism Mod was created under Microsoft's "Game Content Usage Rules" using assets from Microsoft Flight Simulator, and it is not endorsed by or affiliated with Microsoft.
2 days ago
2 days ago
MGouge425
ee2
9 days ago
8 days ago
MGouge425
TalkingSteak913
11 days ago
MGouge425
2 months ago
1 months ago
MGouge425
ElvenStarN7
You can also use Rudder Trim to help maintain runway alignment during a crosswind landing. On short final, adjust the Rudder Trim until the nose is pointed to the runway heading, then apply Ailerons to maintain alignment with the runway centerline until touchdown. This also allows the nosewheel to remain centered at touchdown and significantly reduces the rudder pedal dancing required to maintain the centerline after touchdown.
2 months ago
2 months ago
ounercat
MGouge425
2 months ago
2 months ago
MGouge425
ounercat
2 months ago
2 months ago
MGouge425
cratos38
2 months ago
nukethewhales
2 months ago
ElvenStarN7
2 months ago
FACTOR1364
3 months ago
ecjmt
To monitor your actual takeoff and landing weight during the flight, press PERF / PERF INIT on the FMC and enter the number of people in PASS/WT, and enter the CARGO weight. Then, press PERF / APPROACH and NEXT to view page 2/3 and see your current landing weight.
3 months ago
MGouge425
3 months ago
3 months ago
MGouge425
EduMCfly
3 months ago
3 months ago
MGouge425
kdawg4747
1) Follow the ILS glideslope toward the runway threshold with the AOA gauge green circle illuminated.
2) At about 200 ft. AGL, disconnect the autopilot.
3) After crossing the runway threshold, smoothly reduce the Throttles to IDLE. This will cause the nose to automatically pitch up to reduce the speed and begin the landing flare.
4) Gently apply a little yoke back pressure if needed to complete the flare and gently settle down onto the runway.
5) After touchdown, apply full SPEED BRAKES, and then apply a little forward pressure on the yoke to gently lower the nosewheel onto the runway.
6) After the nosewheel has touched down, apply the toe brakes as needed to slow down and exit the runway.
3 months ago
MGouge425