Updated for V0.67 - Feature Update
- RERUN the included FacilityDataLoader !!! as it requires a new database.
- CHECK MapLibProvider.ini and QuickGuide to enable Stamen 3D
- Add ADF2 items (same as ADF1)
- Add Nav1/2 Course (OBS) item (supported by many aircrafts)
Flight Bag feature update
- Add Missed Approach Legs to Map Approach
- Add Decoding and display of LNM Plan (LNM native format); load from file
- Add Decoding and display of GPX Plan; load from file
- Add PDF as supported Shelf Format
- Add Subfolders support in FlightBag - Shelf
- Add Airport Overview to FlightBag - Shelf (in folder Airport Reports)
- Update SimBrief Flightplan is now stored PDF document (@.FlightPlan)
- Update FlightTable (@.FlightTable) more details added when available in plan
- Update Display of Routes with procedures and limits
- Update MapLib for Stamen Maps (now served by Stadia Maps - needs a Key, default OFF)
- Update METAR collection (new URL from provider)
- Update RA limit for Jet engine acft is now 2500ft
- Fix DME only stations are now properly identified
- The Flightbag, Camera Control and Checklist Box are available as part of HudBar as before, however those are also provided as independent Apps from this version onwards.
You may find the following 4 Apps in the App folder:
- · FS20_HudBar.exe The HudBar App (as we had it before)
- · FS20_FlightBag.exe The FlightBag can now be run on its own if this is helpful
- · FS20_CamControl.exe The CamControl can now be run on its own if this is helpful
- · FS20_ChecklistBox.exe The ChecklistBox can now be run on its own if this is helpful
The 3 additions are exactly the same as the ones you use from the HudBar and share the same settings – however they are, when run on their own, no longer controlled by the HudBar HotKeys but will also not close when the HudBar is closed.
Due to the split the Manuals are also split for the 4 different Apps – you will find them in the App folder as well.
- The extension for the G1000Nxi (zWTnxi-0.12.2-gps-synch-fix-V__) is no longer provided, WT included part of the suggestions (some are not yet completely working…) – so the mod is no longer really needed - pls. remove it if used.
- You will find a new Sim module which allows to gather more and aircraft/instrument specific values from the Sim than before.
The module is provided as Zip file: BM98CH_DataConnector_Wasm-Vx.y.zip (version will change when updated)
This module needs to be unzipped and placed into the Community folder as any other Sim extension (it will reside there as ’BM98CH_DataConnector_Wasm’ folder).
The HudBar will run without this additional module – however some of the items cannot be set
Among others the module allows to have the VNAV button working for the G1000Nxi and the WTG3000 mod.
- Due to license restrictions the Airports will no longer be provided as part of the HudBar App but there is a companion App which allows to collect the data needed for the Map and some other functionality from your Sim installation, see PAGE 25 ‘DataLoader’ for more information.
You will get a PopUp Message when starting the HudBar if the database cannot be found.
Old News
The occasional stutter when saving FLT files for backup or Flightplan is still there in SU12+
NOTE: New items are default OFF
- Updated the QuickGuides - it is included in the package, check it out and look for V0.67 tagged updates
Also - pls let me know (may be via Github) when something fails, pls. include as much information as possible.
Find all added items at the end of each panel in Configuration, adjust as needed.
Configurable display for more than 100 essential Information items as Bar, Tile or Window
- Supports 1 to 4 engine aircrafts (Prop/Engine RPM, FuelFlow for each)
- Provides 10 different content profiles which are fully configurable
- The pilot can directly activate Autopilot commands
- Auto Elevator Trim on a click
- Bottom Bars work best with wide screen monitors
- AutoSave of the Flight (FLT file) at 5 Min intervals
- Flight Recording to KML File
- Checklist Box (configurable)
Usage
- Deploy the release zip content in a folder (no installer provided or needed)
Start MSFS2020 - wait until the main screen is shown
Then Start FS20_HudBar.exe it will connect once the Sim is up and running
Note: the shown values are a bit meaningless until the aircraft is live
Also note that the bar is shown on the ++PRIMARY monitor++ at the bottom of the screen
If you are using it the first time, all items except for the MSFS status are unchecked i.e. no further items are shown in the default bar at the bottom of the screen.
– just head straight to the Configuration and check the ones you like (right click the bar – Configure...)!
Right Click the Bar and choose from the pop up menu
- To select a Profile (1..10)
- To Configure.. to check or uncheck the items to be shown
- To Exit and stop the program
Please take a look into the include Quick Guide for more information
----
Full Credit goes to JayDeeGaming
where the idea of this HudBar is 'borrowed' from
https://www.youtube.com/c/JayDeeGaming/about
(mine does not have any further dependencies however)
Checklist Box Idea Credit:
Missionary Bush Pilot: https://www.missionarybushpilot.com/checklistbox
Maintained at GitHub
https://github.com/bm98/FS20_HudBar
ich kann Dir mitteilen, dass mit der Sim-Rate ALLES IN ORDNUNG IST. Es dürfte an seltsam-unzuverlässigen Verbindungen mit dem MSFS-Server gelegen haben. Bitte verzeih mir , dass ich Dich so oft gequält habe! Jetzt werde ich Dich auf ein Bierchen einladen 😊
Ich grüße Dich herzlich aus dem (leider erfolgreich globalisierten) Ösireich, Dein Laszlo
6 days ago
laszlobarki
9 days ago
8 days ago
bm98ch
Caspy1Uk
I was looking into how to get at least the data from the Sim and it seems feasible.
It is may be an indea to add to the Map?!
15 days ago
bm98ch
There has been an app called Transmitter around, but the creator has ended the support.
thanks. David
17 days ago
ErnieBall
Ich fliege soeben mit der FBW-A320 und leider spinnt die Einstellung der SIMRATE total: Wenn der Wechsel der Simrate z.B. von 1x auf 2x, oder von 1x auf 0,5-Simrate überhaupt reagiert (auf das Mau-Rad), dann nach unzähligen Versuchen "nur zufällig"... - Wenn ich nur wüsste, was ich falsch mache!!
Was ist der Trick, damit es funktioniert?
ich habe viel herumgetan, aber eigentlich funktioniert es nicht.
Für einen neuerlichen Rat wäre ÄUSSERST DANKBAR!
Grüsse, Llaszlo
1 months ago
15 days ago
bm98ch
laszlobarki
Bitte eine Frage zur Sprachausgabe:
Leider sind die CALL OUT ein Kauderwelsch aus gemischtem Englisch und Deutsch: So höre ich z.B. statt Parking Brake released" in richtiger englischer Aussprache den Blödsin "Parking BRAHKE released". Und statt "Glideslope" GLIEDES LAND HOFE".
Was kann man da tun, um die richtige englische Aussprache der Wörter zu bekommen??
ENGLISH:
Refering the Call outs, i have got a question and I am asking for advice:
Instead of "Parking Brake released", the system is saying "Parking BRAHK - A released. And instead of announcing "Glideslope" in correct english, it says "GLEEDES LAHND HOHF - A" with mixing up English and german.
I already have tried much, but I can not get rid of that wrong bullshit-pronounciation.
WHAT COULD I DO??
1 months ago
1 months ago
bm98ch
laszlobarki
What might be wrong with me??
1 months ago
1 months ago
bm98ch
laszlobarki
2 months ago
Nicotine70
2 months ago
2 months ago
bm98ch
colindegreat
2 months ago
2 months ago
bm98ch
colindegreat
3 months ago
3 months ago
bm98ch
Corsten
3 months ago
3 months ago
bm98ch
Caspy1Uk
Thank you for this great App.
One question, is it normal to take a long time to load?
4 months ago
4 months ago
bm98ch
knmanyffw
4 months ago
4 months ago
bm98ch
stamflyer
5 months ago
5 months ago
bm98ch
wiejag